Original Toshiba CE4N Print Head for Mimaki UJF 6042 MKII
Toshiba CE4N head for Mimaki UJF-6042/UJF6042 Printhead
New Original Toshiba CE4N Printhead for Mimaki UJF-6042/UJF6042
This Printhead Assy is suitable for the Mimaki UJV / JFX / UJF-706 Printers. This is the original Mimaki part (number KX-CE308644CS-Gen4). This part does not include the metallic bracket that can be easily re-used from the previous head. Technology: Multi-drop grayscale micro-piezo If the metallic bracket also needs to be replaced, part number M008386 should be purchased instead.
Product Specifications : Technology: Multi-drop grayscale micro-piezo Grayscale levels: 16 Active nozzles: 318 Print swathe width: 53.6 mm Nozzle pitch: 169 μm Native resolution: 150 dpi Printhead weight: 148 g Dimensions: 85 x 70 x 23 mm Drop volume: 6 - 90 pl Typical firing frequency: 2.8 - 28 kHz Ink Compatibility: oil-based pigment ink and UV curable pigment ink
Printer compatibility :
Mimaki JFX-1615
JFX-1615Plus
JFX-1631
JFX-1631Plus
UJF-706
UJV-110
UJV-160
Toshiba CE4N
217 Items
Specific References
chat
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
This GEN5 UV printhead is suitable for a range of UV and solvent printers. It supports up to four colours and has a total of 1.280 nozzles. It is built with longevity and robustness in mind and used in the latest industrial inkjet printers. This is Ricoh original printhead part (number MH5420) and it is covered by a manufacturer warranty. This Ricoh GEN5 is 500mm long in total (head body + cable + connectors). Head cable is 400mm long.
Genuine Xaar 318 6-90PL XP31800012 for Efi Rastek H650/H700/ Mimaki UJF-605C II
New Original Printhead XAAR 318 6-90PL XP31800012 for EFI Rastek H650/H700/ Mimaki UJF-605C II
This XAAR 318 Print Head on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink.
79802M Thermal Printhead for Zebra ZM400 Thermal Barcode Label Printer 600dpi Original
Zebra supplies are made by Zebra, for Zebra printers, to the highest standards. Theyare all extensively tested to ensure best print quality and performance before they arebranded and introduced into the range. Tested on the printers they will be used on,in the combinations they will be used in, they are developed specifically for ourusers' requirements.
