Original xaar 1003 print head 1003/GS12C printhead
New Xaar head XAAR 1003 GS6U/GS6C/GS12C Printhead for Ceramic
Xaar 1003/GS12C printhead 1003 printhead The Xaar 1003 C with High Laydown Technology is the benchmark against which all other single-pass printheads are compared. With its all-round superior performance, this printhead builds on the market-leading Xaar 1002 and its predecessor, the original and ground-breaking Xaar 1001.
Aplication :
- Floor tiles
- Special effects
- Tile cladding for building exteriors
- Wall tiles
- Glass printing
Active nozzles: 1000
Print swathe width: 70.5 mm
Number of rows: 2
Nozzle pitch (interleaved): 70.5 µm
Drop velocity*: 6 m/s
Nozzle density (nozzles per inch): 360 npi
Printhead weight (dry): 144 g
Ink type : Oil
Drop volume* (at 8 levels) : 12 to 84 pL
Number of grey levels* : 8
Typical firing frequency*: 6 to 12 kHz
Dimensions (WxDxH): 125x30x60 mm
Xaar 1003/GS12C
270 Items
Specific References
chat
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
New Original XAAR 126/35 Printhead For Solvent Printer
XAAR 126/35 126/50 126/80 Printhead For Solvent Printer
Original XAAR 126/35 Printhead For Solvent Printer
The Xaar 126 offers a robust and versatile binary inkjet solution for indoor graphics and outdoor signage as well as coding of secondary packaging. Compatible with UV, solvent-based and oil-based inks, the Xaar 126 printhead is available in three drop volume variants (35 pL, 50 pL and 80 pL). This printhead supports programmable waveforms allowing for tuning of jetting performance for a wide variety of fluids.
100% New Original Kyocera water based printhead - KJ4B-QA
Kyocera KJ4B-QA for CNTOP Homertech textile printer
Kyocera Water Printheads KJ4B-QA - 600 dpi - 30kHz - for water based inks
This Kyocera KJ4B-QA printhead is designed for high speed printing of water-based inks. It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz.