Original Mutoh DG-41914 Solvent print head for Mutoh ValueJet 1618 Series printers
The Mutoh VJ-1608H solvent printhead is based upon the most recent Epson technology. This is the original Mutoh printhead (part number DG-41914).
The Mutoh VJ-1618 printhead is suitable for the Mutoh ValueJet 1618 solvent printers. The Mutoh VJ-1618 printhead (sixth generation micro-piezo print head) has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line.
It can be used in 4-colour or 8-colour printers and has a minimum, variable droplet size of 1.5 pico litre (max. droplet size is 21 pico litre). The typical firing frequency for the Mutoh VJ-1618 printhead is 8 kHz.
Product Specifications:
Technology: Micro-Piezo
Native resolution: 1440 dpi
Min. droplet size: 1.5 pico litre
Tot. amount of nozzles: 1440 (8 lines x 180 nozzles)
Firing frequency: 8 kHz
Ink compatibility: eco-solvent and mild solvent
Damper type: requires DX6 Valve Dampers
Printer compatibility :
Mutoh Valuejet 1618
Mutoh Valuejet 1618A
DG-41914
318 Items
Specific References
chat
Comments (0)
No customer reviews for the moment.
Your review appreciation cannot be sent
Report comment
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been submitted and will be available once approved by a moderator.
100% New Original Kyocera water based printhead - KJ4B-QA
Kyocera KJ4B-QA for CNTOP Homertech textile printer
Kyocera Water Printheads KJ4B-QA - 600 dpi - 30kHz - for water based inks
This Kyocera KJ4B-QA printhead is designed for high speed printing of water-based inks. It is a 600dpi one colour printhead with a maximum drive frequency of 30kHz.
The Ricoh GEN4 MH2420 printhead is suitable for a range of aqueous, solvent and UV printers. This printhead has an integrated heater and thermistor. This is Ricoh original printhead and it is covered by a manufacturer warranty. This cable including the connector is 44 cm long. The version with short cable has been discontinued. The long cable version is used as an alternative. The printhead comes with hose barb ink inlet that can be removed in. case o-ring sealed ink inlet are required. This printhead corresponds to Ricoh part numbers N220792W, N220792S, N220792U or N220792E.
Sato Print Head (12) CT412iDT part number R08329100
This SATO Thermal Printhead is a powerful label printer, enabling you to produce on-demand labels with crisp, detailed text. You can print many high-quality address labels because this thermal printer has an innovative direct thermal element.
